Airless Paint Sprayers

Airless paint sprayers use a pumping action to force paint through a nozzle at the end of the gun. They produce a misty fog that settles fast when it comes into contact with air. These sprayers come in various designs and are made by different companies, examples would be the Graco paint sprayers, Wagner paint sprayers, Campbell Hausfeld and of course the Fuji sprayers. They are usually made for outdoor applications and a consumer usually has a choice for either using a large or a small pump.

The airless paint sprayers offer a good finish on wood siding, wood fences, sheds and garages, metal, stucco, lawn furniture, lattice among other outdoor surfaces. It would also be important to note here that these sprayers come in three types i.e. the diaphragm pump; which is very hardy for 'do it yourself' home enthusiasts, piston pump; for professional sprayers, and the Double stroke piston pumps for construction work.

These sprayers come with different price ranges and they can cost anywhere between $150 to $3,000 depending on the type of project to be undertaken and the amount of horse power required. All said and done, before settling for a particular spray gun one should check the air and fluid controls to make sure that they work perfectly.

You should also ensure that the gun is easy to clean. I would go for a gun that makes spraying a pleasure all the time. After you are done with the job of painting it is usually advisable to unplug the gun and release the pressure trapped inside. These is done to avoid accidents that might happen if it is unplugged by someone else. As a precaution it would also be advisable to keep it out of the reach of children all the time. The damage it can do to your child cannot be overlooked.
Peter Gitundu Creates Interesting And Thought Provoking Content on Painting. For More Information, Read More Of His Articles Here PAINTING TIPS If You Enjoyed This Article, Make Sure You SUBSCRIBE TO MY RSS FEED!

Article Source: http://EzineArticles.com/?expert=Peter_Gitundu

There are two reasons that I am qualified to write about this topic. One, I have been a general contractor for the last five years. In that time, I have worked with almost a dozen painters. Second reason: My wife loves to paint our house as a hobby.

First of all, there are four types of painting that will need to be done on your home; interior, exterior, trim and specialty surfaces. Let's look at each one separately as the techniques, materials and skills required vary quite a bit. There are several other variables, such as whether or not your home is single or two stories, the over all size of your home and it's age.

Interior walls are by far the easiest for most homeowners to do themselves. Wash the walls, patch any holes, cut in the ceiling and roll on two good coats. Sounds easy enough. Until you try to fit this extra work into an already busy schedule. You will also need to buy some supplies that you may never use again, like drop cloths, brushes, rollers, roller handles, paint trays, etc. Older homes often have paint that is oil based, or worse, lead added. These require special materials and preparation. Let's add in a two story home with stairwells and cathedral ceilings and the fun goes right out the window. Professionals deal with these issues all the time and have the skill and knowledge to make sure the end result is the quality paint job you seek.Exterior surfaces can present endless challenges to the DIY painter. Here in Southern California, most of the homes have a stucco finish. This surface is very rough and captures dust and dirt over time. Good painters use a pressure washer to clean out the dirt and knock off the loose paint. Also, depending on the age of the home, there can be a considerable amount of repair that is needed before paint can be applied. If your home has siding or a large amount of wood surfaces that have not been painted in a while, the old paint will have to be scraped off and any cracks filled (we'll talk more about that in the trim section). Again, the multi story home compounds these challenges.

Trim can actually be separated into interior and exterior categories. Interior trim like door casings, baseboards and crown molding are usually painted white or some other accent color. This is most often accomplished with a high gloss paint and a brush. There is an art to cutting in the edge of trim in such a way that you don't get trim paint on the wall, or vice versa if the trim is done first. One of my painters, Jeff, is an artist at this, but he has been painting for almost thirty years. Exterior trim, usually wood, suffers a great deal of damage at the hands of the elements. Unless it is painted every three to five years, there will most likely be peeling, cracking and checking (cracks in the wood itself). All of your trim will need to be scraped and holes and cracks filled. This is the time consuming part of doing a good paint job that most home owners either do half heartedly or skip altogether. Remember, your paint job will only be as good as your prep.

Specialty painting covers all of the things not mentioned so far. Painting or refinishing kitchen cabinets and other woodwork is definitely not recommended for the amateur. I repainted my cabinets with an airless sprayer and they turned out very nice, but it took me almost three weeks of evenings and weekends and I do have a fair amount of painting experience. If I had really nice cabinets and wanted them refinished with a glaze or a stain, I would hire a professional in a heartbeat. There are also those contractors who specialize in painting concrete to make it look like something else (brick, stone, etc.). The materials, tools and skills for this type of work will be way beyond the reach of the average DIY homeowner. Mural painting and faux painting can give your home a rich elegant look if they are done well. If you want to paint cartoon figures in your child's room, quality is not quite so important. As a matter of fact, let the kids help. If, however, you want a Tuscan countryside viewed through a villa window, unless you are an artist, hire a professional. Faux painting can actually be accomplished with some practice (my wife has gotten pretty good at it), but if you have a large area to cover, two story walls and ceilings or other such obstacles, call in the professionals.

Masking off bushes and landscaping, putting down drop cloths and other preparatory steps are necessary to avoid the inevitable mess that painting can cause. Unfortunately, many homeowners are in a hurry or are too inexperienced to make sure all of these steps are taken and often spend more time cleaning up than it took to do the painting in the first place. Painting contractors make a living at their trade because they know the best and most efficient ways to get the job done. That includes preventing costly down time due to spilled or over sprayed paint. They also have a tremendous amount of knowledge about types of paint and how to apply them. If you want quality results, let the pros do what they do best and spend the time with your family. You will be happier in the long run.

Tips and Precautions Related to Airless Paint Sprayers

Airless paint sprayers are mainly used for surface preparation. With their help, you can expect to get the paint job done faster and easier. These is the reason why they have been well received by professional paint contractors.

These are some of the features that you should always look for when selecting the paint sprayers in order to have a successful paint job.

1.) How safe are the sprayers that you are using? Since these sprayers function in high temperatures, they can corrode or burn your skin if they come into contact with it.

2.) How is your masking and paint preparation? All items that are not supposed to be painted should always be covered, if you are painting walls you will have to cover light fixtures, doorknobs, light switches and even the floors. This is because the Airless paint sprayers produce such fine sprays that it forms a misty fog that can settle anywhere.

You should never forget to mask yourself also by putting on a safety cover which should include
synthetic overalls, spray hood, safety glasses and a respirator.

3.) The airless paint sprayer can be used to spray many different types of paints but not ones that have textures and grit in them. These sprayers can be used effectively for both spray oil and water based paints. One thing that you should remember is that they apply too much paint too quickly, making them only applicable on exterior surfaces like building walls, fences, billboards etc.

The actual operation of an airless paint sprayer involves pumping spray through a tiny hole at the end of the gun. The spraying should be done while keeping your hand moving horizontally back and forth.
Peter Gitundu Creates Interesting And Thought Provoking Content on Painting. For More Information, Read More Of His Articles Here PAINTING TIPS If You Enjoyed This Article, Make Sure You SUBSCRIBE TO MY RSS FEED!

Article Source: http://EzineArticles.com/?expert=Peter_Gitundu

Choosing the Right Airless Paint Sprayer For the Job

When choosing an airless paint sprayer, make sure that you look at all of the options that are available to you before making your final decision. A number of things that need to be looked at can make a large difference in whether you are able to do a professional looking job, even if you are just painting a small item. You have choices to make, such as the type of sprayer that you are going to use. Many people choose a smaller sprayer, such as the Wagner Procoat for jobs around the house, well they may use a larger compressor from Campbell Hausfeld whenever they have a larger job to do. Regardless of which one they choose, however, making the right decision when it comes to the airless paint sprayer that you are going to use can make all the difference in the world.

One of the first decisions that you need to make when choosing a paint sprayer has to do with the size job that you are going to be doing. If you're just going to be doing smaller jobs around the house, you can generally pick up a smaller airless paint sprayer at one of the local hardware stores. The Wagner Procoat is one of the more popular of these, and they can certainly handle small to medium-size jobs around the home. For larger jobs, you may want to have a dedicated unit, such as a compressor that is available from Campbell Hausfeld. You can purchase these new or used, depending on your needs and budget.

Another thing that needs to be taken into consideration is the different tips shapes and sizes that are available. Some are going to be well-suited for spraying smaller items, but you may need to get a larger tip in order to spray a larger area. For example, spraying a wall will require that you get a larger tip than if you were just spraying a chair. There are reviews available for these various sizes tips on the Internet that can act as a guide to help you choose one that is going to work well for you.

If you have an extremely big job that needs to be done, you may want to consider renting one of these paint sprayers instead of purchasing one. For example, we may want to use a sprayer in order to paint our home but we don't want to have to go through the expense of purchasing a large unit. Renting them from a hardware store is often an economical solution to this problem.

Choosing airless paint sprayers does take a little bit of looking into, but generally speaking, they are interchangeable for the most part. For example, a smaller paint sprayer, such as the Wagner Procoat may be able to handle a larger job, provided you don't do it on a regular basis. If you do happen to have a larger compressor from Campbell Hausfeld, you can also use these to do smaller jobs if you simply change the text size. If you're unsure of which sprayer to use, check the reviews on the Internet. They will generally be able to give you an idea.
After a succesful life in trading, importing and exports, Rupert now spends his time writing freelance articles for many well-known publications, as well as various educational institutions. For more of Rupert's articles regarding airless paint sprayers, please visit http://www.paint-sprayer-reviews.com/

Article Source: http://EzineArticles.com/?expert=Rupert_Smith

Lattice can look beautiful as an accent in your yard, as edging around your deck or porch or across the top of the fence. However, the holes and all the criss-crosses made by the slats can make painting lattice a real chore. Here are some tips to make the job of painting lattice a little bit easier that will give you great results that you can be proud of.

To begin painting the lattice you first need to find an area where you can lay it out and paint it. Spread newspaper on the ground where you want to paint the lattice to avoid any overspray from getting on the ground underneath. The wood used to make lattice often times can be a bit rough and full of splinters, so first prep the lattice for painting by using a sheet of fine grit sandpaper to lightly sand the lattice and remove any rough spots or splinters. When you are done sanding brush away any dust or debris.

Lattice can be painted with a paint brush however, because of all the holes and the edges of the slats it can be an extremely time consuming job if you try to tackle it by hand. A much better option is to rent and airless paint sprayer. These paint sprayers can be rented from your local home improvement store or rental shop and will make the job of painting lattice a breeze. Unlike forced air paint sprayers, airless paint sprayers don't require a compressor but instead use a pump to gently spray the paint out of the nozzle. Airless paint sprayers result in much less overspray and apply a nice, even coat or paint with minimal effort.

It is a good idea to prime the lattice before painting it to ensure that your paint will last longer and that it will hold up to the elements. You can buy primer in a spray can and spray a coat on the lattice to prime it. Be sure to do both sides of the lattice and allow the primer to dry before moving on to painting.

Choose and exterior latex paint in whatever color you prefer. Insert the dip tube from you airless paint sprayer into your paint and turn the knob on the paint sprayer to recirculate and allow the pump to run for a few minutes in order to prime the paint sprayer and force any trapped air out of it.

Next, take an old piece of cardboard and adjust the flow of the paint from the paint gun. You will want a nice fan shaped spray that is not darker on the edges than in the middle, but is a consistent color the whole way across. Many people set their paint sprayers to spray too much paint which can result in runs and heavy spots in the paint. Once you have adjusted the nozzle to deliver the right amount of paint you can begin painting your lattice.

Remember that as soon as you squeeze the trigger on the paint gun it will start spraying paint so you need to already have your hand in motion before you squeeze the trigger. Otherwise you can wind up with a thick spot that runs. Use long, overlapping spray strokes to cover your lattice with paint, making sure that you are getting all of the inside edges of the slats covered. Once you have finished one side of the lattice, allow it to dry then flip it and paint the other side.

After the lattice has dried thoroughly you are ready to use it in whatever project you need it for. To clean the airless paint spray rinse it off and run some water through it to remove any paint from inside then return it to the place you rented it from.

Airless Paint Sprayers Pad